Copper USE-2 / RHH / RHW-2 Wire (XLPE Insulation)
Wire & Cable Your Way offers a wide selection of XLP/USE-2/RHH/RHW-2 Building Wire products cut by the foot at low prices & fast shipping. These cables featue an XLPE jacket. USE-2 or RHW-2 or RHH 90°C - 600 Volt Stranded Building Wire is suitable for use in general purpose wiring applications and may be installed in raceway, conduit, direct burial and aerial installations where a cable having superior flame retardance is required. USE-2 or RHW-2 or RHH Building Wire is commonly used as solar wire for various applications.
For more details Click here.
Solid Copper XLP/USE-2/RHW-2- Product NamePriceQuick View
- Get Quote
Check Availability
- Get Quote
Check Availability
- $0.30 /ft.
In Stock
Stranded Copper XLP/USE-2/RHW-2- Product NamePriceQuick View
Copper USE-2/RHH/RHW-2 with XLPE Insulation
USE-2 Cable Properties
Underground
Service
Entrance Cable
Rated for Direct Burial
600 V Stranded Building Wire, UL recognized cross-linked Polyethylene Insulation XLPE
Application:
USE-2 cables are primarily used for power distribution, in raceways in accordance with National Electrical Code, except that the cable is not rated for use in cable tray. USE-2 is approved for direct burial and for service entrance below ground. USE-2 cables may be used in wet or dry locations, with ambient temperatures not exceeding 90°C. Voltage rating for USE-2 cable is 600V
Applicable Standards:
USE-2 meets or exceeds the following standards
UL 44
Requirements of the National Electrical Code
ASTM standards B 800, B 801
Sunlight resistant
Description:
Single copper conductor, stranded, insulated with moisture and heat resistant, chemically cross-linked polyethylene insulation. Temperature rating 90° C in wet and dry applications.available.
Insulation:
USE-2 has abrasion, heat and moisture resistant cross-linked polyethylene insulation XLPE