Anaconda Type W Power Cable, 2 AWG 4C, 2kV

2000V, 90°C (-40°C), Oil and Sunlight Resistant.

Cut to length - sold by the foot. Enter the desired footage in the QTY box.
Minimum 10' to maximum 1000'. Please call for longer put ups.

Color:
Black

Applications:
Designed for use as trailing cables on AC mining equipment: - Where a ground-check conductor is not required for fail-safe ground monitoring - Where induced voltages do not present a problem

Compliances:
- ICEA S-75-381 Portable and Power Feeder Cables for use in mines and similar applications
- Meets flame test requirements and is accepted for listing by MSHA
- Approved by the Pennsylvania Department of Environmental Protection
- Meets CAN/CSA C22.2 No. 96 Portable Power Cables and

Conductor:
6 AWG thru 500 kcmil coated annealed copper, bunched wires, rope-lay-stranded per ASTM B172

Insulation:
Ethylene Propylene Rubber (EPR) insulation colored (black, white, red and green)

Jacket:
Reinforced, two-layer, extra-heavy-duty, leadcured Chlorinated Polyethylene (CPE)

Specifications*:

Size: 2 AWG
Number of Conductors: 4
Conductor Strand: 259
Nominal Insulation Thickness: 0.060 inches / 1.52 mm
Outside Diameter: 1.48 inches / 37.60 mm
Current AMPS: 128
Net Weight: 1.701 lbs per ft

Spec Sheet

View Spec Sheet for Complete Details (PDF)