$20 Order Minimum. Questions? Call: 855-880-8010


12-4C w/ Ground Type MC Cable, PVC Jacket, Interlocked Armor Control Cable

Minimum Quantity: 50
Maximum Quantity: 1000
Availability: IN STOCK
Quantity: Information
Eligible for FREE Shipping
  • Description

12-4C w/ Ground Type MC Cable w/ PVC Jacket
600 Volt UL Type MC, CT USE, 90°C
XLP VW-1 XHHW-2 Insulation
Aluminum Armor
Copper Conductors

Cut to length - sold by the foot. Enter the desired footage in the QTY box.
Minimum 50' to maximum 2500'. Please call for longer put ups.


For use in harsh environments where maximum conductor protection is required. Used for power, control and lighting circuits in a broad range of commercial and industrial pulp and paper, mining, and petroleum applications. Approved for use in wet or dry locations at 90°C, for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 and Class III, Division 1 and 2 hazardous locations. UL approved for use at 90°C for continuous operation, 130°C for emergency overload conditions, and 250°C for short circuit conditions. Aluminum interlocked armor cable is recommended as an economical alternative to wire in conduit systems.

Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8

Cross-linked polyethylene (XLP) per UL Standard 44 for Type XHHW-2, VW-1 conductors

Black sunlight-resistant PVC per UL Standard 1569

Grounding Conductor:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance with UL Standard 1569

Aluminum interlocked tape armor per UL Standard 1569, also available in galvanized steel armor

Flame Tests:
UL 1581 (70,000 BTU/hr) Flame Test

Color Code:
ICEA Method 1, Table E-2

• Explosion Proof, Class 1 Division 2: 424CU series – aluminum exterior components, nickel-plated brass interior components
• Rain Tight: 416MC series – all nickel-plated brass


Size: 12 AWG
Number of Conductors: 4
Ground Wire Size: 12 AWG
Minimum AVG Insulation Thickness: 0.030 inches
Minimum AVG Jacket Thickness: 0.050 inches
Armor Diameter: 0.62 inches
Overall Diameter: 0.73 inches
Net Weight: 0.295 lbs per ft
Class 1 Div. 2 Connector Number: 424CU03
Rain Tight Connector Number: 416MC03


*Data provided on this page is subject to change based on different manufacturers variances.