16 AWG 3 Pair FR-EPR/CPE Instrumentaion Cable, Individual & Overall Shield w/ FR-EPR Insulation & CPE Jacket, 600V, Sunlight Resistant, Approved for Direct Burial
Cut to length - sold by the foot. Enter the desired footage in the QTY box.
Minimum 50' to maximum 1000'. Please call for longer put ups.
In free air, raceways or direct burial.
In wet or dry locations.
Approved for direct burial, Class I, Div. 2 industrial hazardous locations per NEC.
Rated at 90˚C wet or dry
Ripcord applied to all cables with jacket thickness of 60 mils or less
Excellent physical, thermal and electrical properties
Excellent moisture resistance
Excellent resistance to compression cuts and heat deformation
Excellent flame resistance—burns to an ash; does not exhibit thermoplastic drip
Low coefficient of friction for easy pulling
Sunlight- and weather-resistant
Excellent low temperature cold bend characteristics
Meets cold bend test at -40˚C
UL 1277 Type TC, UL File # E57179
ICEA S-73-532/NEMA WC57
Flame Test Compliances:
UL 1581/UL 2556 VW-1
UL 1685 Vertical Flame Test
EPA 40 CFR, Part 261 for leachable lead content per TCLP
Stranded tinned copper per ASTM B33. Class B stranding per ASTM B8
Flame-Retardant Ethylene Propylene Rubber (FR-EPR) Type II
Color-coded per ICEA Method 1, Table E-2 plus alpha-numeric printed numbers (does not include white or green)
Sunlight resistant, lead-free, flame-retardant thermoplastic Chlorinated Polyethylene (CPE)
Individually shielded & overall shielded with aluminum/polyester in contact with stranded tinned copper drain wire.
Color-coded per ICEA Method 1:
Pairs - black and white
Size: 16 AWG
Number of Pairs: 3
Overall Jacket Thickness: 0.060 inches
Outside Diameter: 0.60 inches
Net Weight: 0.151 lbs per ft
*Data provided on this page is subject to change based on different manufacturers variances.