1/0 Stranded Aluminum Conductor 35KV URD, Full Neutral 100%

1/0 Stranded Aluminum Conductor 35KV URD, Full Neutral 100%"

Cut to length - sold by the foot. Enter the desired footage in the QTY box.

Applications:
Aluminum Conductor 35KV URD cable is primary used for underground distribution, in direct burial or installed in conduit. 35KV URD cable is suitable for use in wet or dry locations. URD cable is to be used at 35,000 volts or less and not to exceed 90°C temperature in normal use.

Conductor:
Solid or compressed concentric stranded 1350 series aluminum conductor per ASTM. The stranded conductors are water-blocked with conductor filling compound

Conductor Shield:
Extruded thermoset semiconducting shield, which is free stripping from the conductor and bonded to the insulation

Insulation:
Naturally high dielectric strength TR-XLPE insulation. Covered by extruded thermoset semiconducting insulation shield. Optional EPR insulation is available upon request

Metalic Shield:
Concentric neutral consisting of solid bare copper wires helically applied and uniformly spaced over the insulation shield

Jacket:
Black jacket of linear lows density polyethylene (LLDPE), which is sunlight, abrasion and heat resistant. The jacket has 3 red stripes, the NESC lightning bolt and sequential footage markings

Standards:
ASTM B230, B231, B609 • ANSI/ICEA S-94-649 • AEIC CS-8 • RUS ACCEPTED • For 90°C continuous, 130°C emergency and 250°C shortcircuit operation

Specifications*:

Size: 1/0
Insulation Thickness: 345 mils
Concentric Neutral: 16‐# 14
Conductor Diameter: 0.364 inches
Insulation Diameter: 1.10 inches
Insulation Shield Diameter: 1.19 inches
Jacket Diameter: 1.43 inches
Cable Weight: 0.909 lbs per ft

*Data provided on this page is subject to change based on different manufacturers variances.